Panasonic TH-55SF1HU Operating Instructions Manual Download Page 65

Page: 65 / 105

English

■

To adjust sound volume level

Press <VOL +> <VOL ->.

Note

●

When [Maximum VOL level] is [On], the volume

cannot be set to the level higher than the level set for

[Maximum VOL level].

Maximum VOL level

Adjusts the maximum volume.

[Off]:

The sound volume level can be set up to 100

(maximum).

[On]:

The sound volume level will not exceed the set

point.

●

Outputs with the set volume when [Maximum VOL

level] in [On] state is selected on the menu.

■

To adjust sound volume level

Press <VOL +> <VOL ->.

Note

●

When the [Maximum VOL level] is switched from

[Off] to [On], if the [Maximum VOL level] is set lower

than the [Initial VOL level], the [Initial VOL level]

automatically becomes the same as the [Maximum

VOL level].

Input lock

Locks the input switch operation.

[Off] / [HDMI1] / [HDMI2] / [DIGITAL LINK] / [DVI-D] /

[PC] / [COMPONENT]

/ [VIDEO] / [USB]

: [COMPONENT] may be displayed as [RGB]

depending on the settings of [Component/RGB-in

select]. (see page 46)

Note

●

Input switch can be used when this is set to [Off].

Button lock

Limits operation of the buttons on the unit.

[Off]:

All the buttons on main unit can be used.

[On]:

All button operations except for the <Main Power

On / Off button> are disabled.

[MENU & ENTER]:

Locks <MENU (Unit)> and <ENTER (Unit)> buttons.

■

To set [Button lock]

Set with the buttons on the unit.

[Off]:

   Press  <+ (Unit)> for 4 times.
   Press  <INPUT (Unit)> for 4 times.
   Press  <- (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

[On]:

   Press  <- (Unit)> for 4 times.
   Press  <ENTER (Unit)> for 4 times.
   Press  <+ (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

[MENU & ENTER]:

   Press  <ENTER (Unit)> for 4 times.
   Press  <+ (Unit)> for 4 times.
   Press  <INPUT (Unit)> for 4 times.
   Press  <ENTER (Unit)>.

Note

●

About how to reset the settings to defaults:

“Initialization” (see page 69)

Controller user level

Limits operation of the buttons on the remote control.

[Off]:

You can use all of the buttons on the remote control.

[User1]:

You can only use <Standby (ON/OFF) button>,

<INPUT>, <RECALL>, <MUTE>, <VOL +> and

<VOL -> buttons on the remote control.

[User2]:

You can only use <Standby (ON/OFF) button> on

the remote control.

[User3]:

Locks all the buttons on the remote control.

Note

●

About how to reset the settings to defaults:

“Initialization” (see page 69)

Summary of Contents for TH-55SF1HU










































































































Search results

Summary of Contents for TH-55SF1HU

Reviews:

Related manuals for TH-55SF1HU

Brands by name

Popular brands

Panasonic TH-55SF1HU, Operating Instructions Manual

Search results

Summary of Contents for TH-55SF1HU

Reviews:

Related manuals for TH-55SF1HU

Brands by name

Popular brands