English
60
Options Adjustments
This unit offers special functions conveniently used
according to the installation location and application.
1
Press <SETUP>.
[Setup] menu screen will be displayed.
2
Select [OSD language] with
and press <ENTER> for more than 3
seconds.
Following screen will be displayed.
Options
Display serial number
USB data cloning
Software licenses
Shipping
3
Select [Options] with and press
<ENTER>.
[Options] menu screen will be displayed.
1/3
0
0
Options
Input search
Failover/Failback
Audio input select
Onscreen display
Initial VOL level
Initial input
Maximum VOL level
Input lock
Button lock
Controller user level
PC auto setting
Off
Off
Off
On
Off
Off
Off
Off
2/3
0
---
Options
Off-timer function
Initial startup
Startup logo
Display ID
Controller ID function
Serial ID function
Information timing
LAN control protocol
Protocol 1
Off
Off
Enable
Last memory
Off
Serial response(ID all)
Off
Serial daisy chain position
3/3
Options
Power on screen delay
Clock display
Power on message(No activity power off)
Power on message(Power management)
POWER button lock
Off
On
On
Off
Off
Note
●
[POWER button lock] function is only for TH-
55SF1HU, TH-49SF1HU and TH-42SF1HU.
4
Select the item to set with .
For [Input search], [Failover/Failback], [Audio input
select] and [Information timing], the submenu screen
will be displayed when you press <ENTER>.
(see page 60, 61, 64, 67)
5
Set with .
6
Press <SETUP> to exit from [Options]
menu.
Note
●
The remote control is necessary to display the
[Options] menu. The control panel buttons on the
main unit cannot be used to display the menu.
●
Press <RETURN> to return to the previous menu.
●
The serial number of this device is displayed when
[Display serial number] is selected in step 3.
●
The software License is displayed when [Software
licenses] is selected in step 3.
Input search
When a signal is not detected, another input with a
signal is automatically selected.
Select the item with .
Select the set point with .
Input search
Input search
1st search input
2nd search input
Custom
(None)
(None)
[Input search]
[Off]:
When there is no signal, the input is not switched
automatically.
[All inputs]:
Searches all inputs and switches to an input with a
signal.
Input search is executed in the following order.
(Example) When the current input is [HDMI1]
[HDMI2
] → [
DIGITAL LINK
] → · · · · · · · · · →
[USB
] → [
HDMI1]
Note
●
The inputs set to [(Skip)] in [Input label] (see
page 50) are skipped when searching.
●
When Y/G/VIDEO terminal is used as VIDEO
input, set [COMPONENT]
*
to [(Skip)].
*
: [COMPONENT] may be displayed as [RGB]
depending on the settings of [Component/RGB-in
select]. (see page 46)
