manualshive.com logo in svg

Panasonic TH-50BF1E, Operating Instruction, Page: 79 / 112

Share
Download
Panasonic TH-50BF1E Operating Instruction Download Page 79

77

Start

Function

Scrolling bar only

Time designation

6:15

12:30

Mode

Start time
Finish time

Screensaver

Time  15:00

Start

Function

Scrolling bar only

Interval

12:00

3:00

Mode

Periodic time
Operating time

Screensaver

Time    15:00

Start

Function

Scrolling bar only

Standby after SCR saver

6:15

Mode

Screensaver duration

Screensaver

Time  15:00

Screensaver (For preventing image retention)

Setup of Screensaver Time

After selecting Time designation, Interval or Standby after SCR saver, the relevant Time Setup will become available 

for selection and the Operating time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)

Notes:

• 

Pressing “ ” or “ ” button once changes the Time 1 minute. 

[However, switching occurs every 15 minutes when Periodic time is 

selected.]

• 

Pressing “ ” or “ ” button continuously changes the Time by 15 

minutes.

• 

“Screensaver duration” of the “Standby after SCR saver” can be set 

from 0:00 to 23:59. When this is set to “0:00”, “ Standby after SCR 

saver” will not be activated.

Note: 

Timer function will not work unless “Time” is set. 

Press to select Start time / Finish time 

(when Time designation is selected).

Press to select Periodic time / Operating time 

(when Interval is selected).

Press to select Screensaver duration

(when Standby after SCR saver is selected).

Press to setup.

 button: Forward

 button: Back

Side panel

Do not display a picture in 4:3 mode for an extended period, 

as this can cause an image retention to remain on the side 

panels on either side of the display field.

To reduce the risk of such an image retention, illuminate the 

side panels.

This function may be applicable to the non-picture area.

  

Off:

   Darken both ends.

  

Low:

  Make it dark gray.

  

Mid:

   Make it gray.

  

High:

  Make it light gray.

side panel

4:3 Screen 

Display

image 

retention

Note: 

To reduce the occurrence of image retention, set the Side panel to High.

Wobbling 

Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper 

contour of image.

Note:

When this function is operating, part of the screen may appear to be missing.

Summary of Contents for TH-50BF1E

















































































































Reviews:

No comments