manualshive.com logo in svg

Panasonic TH-50BF1E, Operating Instruction, Page: 74 / 112

Share
Download
Panasonic TH-50BF1E Operating Instruction Download Page 74

72

Day/Time settings / On/Off timer settings

The timer can switch the Display On or Off.
Before attempting Timer Set, confirm the Time and adjust if necessary. 

Then set Power on time / Power off time

1

Press to display the Setup menu.

2

Press to select On/Off timer settings or Day/Time settings.

Press to display the On/Off timer settings screen or 

Day/Time settings screen. 

Day/Time settings

On/Off timer settings

1

Press to select Day or Time.
Press to setup Day or Time.

 button: Forward

 button: Back

Set

Day

MON

99:99

Time

Day/Time settings

    Time     MON  99:99

Notes:

• 

Pressing “ ” or “ ” button once changes Time 1 minute.

• 

Pressing “ ” or “ ” button continuously changes Time by 15 minutes.

2

Press to select Set.

Press to store Day/Time settings.

Notes:

• 

Set cannot be selected unless Time is set.

• 

Unless setting the present time other than “99:99”, “Day” and “Time” cannot be set.

• 

The settings of “Day” and “Time” are reset when leaving the display turned off for 7 or 

more days for the following reasons: 

Pressing 

 switch of the unit to turn off the display. 

Disconnecting the AC cord. 

Interruption of power supply.

1

Press to select 

Power on time / Power off time.

Press to setup  

Power on time / Power off time.

 button: Forward

 button: Back

Power on function

Off

0:00

Off

0:00

Power on time
Power off function
Power off time

On/Off timer settings

Time     99:99

Notes:

• 

Pressing “ ” or “ ” button once changes Power on time / Power off time 1 minute.

• 

Pressing “ ” or “ ” button continuously changes Power on time / Power off time by 

15 minutes.

2

Press to select Power on function / Power off function.

Press to select On.

Note:

 Timer function will not work unless “Time” is set. 

Summary of Contents for TH-50BF1E

















































































































Reviews:

No comments