
70
Sound Adjustment
Sound
Normalise
Off
Normal
Sound mode
Internal
Speaker
Bass
0
Mid
0
Treble
0
Balance
Sound Out
Main
Audio out (PIP)
Off
Surround
Off
Level Meter
Channel 1
Left Channel
Channel 1
Right Channel
0
SDI sound output
This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD)
SDI Sound Output 2/2
Off
Sound out
Off
Level Meter
Channel 1
Left channel
Channel 1
Right channel
Item
Details
Left channel
Channel 1 to Channel 16
Selects left audio channel.
Right channel Channel 1 to Channel 16
Selects right audio channel.
Sound out
On
Off
On:
Enables audio output.
Off:
Disables audio output.
Level Meter
Off
1-8ch
9-16ch
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter;
4 channels each on both right and left sides of the display.
Off:
Hides the audio level meter.
1-8ch:
Displays the audio level meter (1-8ch)
9-16ch:
Displays the audio level meter (9-16ch)
Note:
This menu is unavailable when two
screen display mode is active.
Item
Details
Speaker
Select the audio output.
Internal:
Internal speakers
External:
External speakers
Sound mode
Normal
: Emits the original sound.
Dynamic
: Accentuates sharp sound.
Clear
: Attenuates human voice.
Bass
Adjusts low pitch sounds.
Mid
Adjusts normal sounds.
Treble
Adjusts high pitch sounds.
Balance
Adjusts left and right volumes.
Surround
Select On or Off.
Audio out (PIP)
Main
: Selects main picture sound.
Sub
: Selects PIP frame sound.
A
B
VIDEO
PC
A
B
VIDEO
PC
Musical note ♪ is displayed on right side of the audio
output screen label.
Note:
Bass, Mid, Treble and Surround settings are memorized separately for each Sound mode.
1
Press to display the Sound menu.
2
Select to adjust each item.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
3
Press to exit from adjust mode.
Helpful Hint ( /
Normalise
Normalisation)
While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.