18
Displaying PC Screen on TV
The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 14)
Display the Input select menu
Select “PC”
Input select
HDMI1
ANTENNA/Cable In
HDMI3
HDMI2
AV
PC
select
enter
Corresponding signals
(p. 43)
PC menu setting
(change as desired)
Making settings, please refer to p. 22.
Menu
Item
Adjustments/Configurations (options)
Setup
PC setup
Dot clock
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred.
H-position
Adjusts the horizontal position.
V-position
Adjusts the vertical position.
Clock phase
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the Clock phase so that a
clear picture appears.
It may not be possible to display a clear picture due to poor input signals.
Sync
H & V: The H and V sync signals are input from the HD/VD connector. (p. 43)
On green: Uses a synchronized signal on the Video G signal, which is input from the
G connector. (p. 43)
Reset to defaults
Resets PC adjustments. Confirmation screen is displayed. Select “Yes” and press OK to reset.
H-frequency
V-frequency
Displays the H (Horizontal)/V (Vertical) frequencies.
Display range
Horizontal: 15 - 110 kHz
Vertical: 48 - 120 Hz
Sound menu (p. 24)
