24
Menu
Item
Adjustments/Configurations (alternatives)
Sound
Sound mode
Selects your favorite sound mode.
(Standard/Music/Speech/User)
•
The selected mode affects all input signals.
Standard: Provides the suitable sound quality for all types of scenes.
Music: Improves sound quality for watching music videos, etc.
Speech: Improves sound quality for watching news, drama, etc.
•
In Music and Speech modes, you can adjust Bass and Treble settings, and those settings will be
stored for each mode.
User: Adjusts the sounds manually by using the equalizer to suit your favorite sound quality.
•
For the User mode, Equalizer will appear on the Sound Menu instead of Bass and Treble. Select
Equalizer and adjust the frequency.
Bass
Increases or decreases the bass response.
(-15 - +15)
Treble
Increases or decreases the treble response.
(-15 - +15)
Equalizer
Adjusts the frequency level to suit your favorite sound quality.
(150Hz/250Hz/500Hz/1kHz/2kHz/4kHz/8kHz/12kHz/Reset to defaults)
•
This function is available when Sound mode is set to User.
•
Select the frequency and change the frequency level by using the cursor button.
•
To enhance the bass sound, raise the level of the lower frequency. To enhance the treble sound,
raise the level of the higher frequency.
•
To reset the levels of each frequency to the default settings, select Reset to defaults by using the
cursor button, and then press the OK button.
Balance
Emphasizes the left/right speaker volume.
(L15 - R15)
Surround
Enhances audio L/R response when listening to stereo. Ideal for music and action movies.
(On/Off)
A.I. sound
Equalizes overall volume levels across all channels and external inputs.
(On/Off)
Volume leveler
Minimizes volume disparity after switching to external inputs.
(-6 - +6)
Distance to wall
(Up to 1ft(30cm)/Over 1ft(30cm))
Up to 1ft(30cm): TV is mounted. Reduces low frequency level to prevent resonance.
Over 1ft(30cm): TV is on a stand. Keeps current setup.
Preferred audio type
Allows setting of the accessible audio format when it's broadcast and the language setting
matches.
(Main Audio/Hearing Impaired/Visually Impaired)
Digital audio out selection
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and HDMI 1
(ARC function) terminals.
(Auto/PCM)
Auto: Dolby Digital and HE-AAC multi-channel are output as Dolby Digital Bit stream. MPEG is
output as PCM.
PCM: Digital output signal is fixed to PCM.
•
ARC (Audio Return Channel): A function of digital audio output using HDMI cable.
HDMI input (HDMIx in)
The default setting is Digital for the HDMI connection. (Digital input signal)
(Digital/Analog)
Select audio input terminal when a DVI cable is connected along with an analog audio input signal.
Reset to defaults
Resets all Audio adjustments to factory default settings.
Network
Network connection
Connects the TV to a network.
Follow the directions on the screen to complete the network settings.
Network status
Tests the connection between the TV to the local router and the Internet.
Displays Current settings and status screen. (MAC address/IP Address, etc.)
Timer
Sleep
Selects how long the TV stays on before it automatically turns off.
(90 minutes/60 minutes/30 minutes/15 minutes/Off)
No activity for 4 hours
(Power TV off/Stay on)
To conserve energy, the TV automatically turns off when no operation of remote and side panel key
continues for more than 4 hours. Not in use when "On/Off Timer" is set. "No activity for 4 hours was
activated" will be displayed for about 10 seconds when the TV is turned on for the first time after
the power was turned off by "No activity for 4 hours" feature. The onscreen display will flash 3, 2
and 1 to indicate the last three (3) remaining minutes prior to the shut-off.
No signal for 10 minutes
(Power TV off/Stay on)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. Not in use when "On/Off Timer" is set. "No signal for 10 minutes
was activated" will be displayed for about 10 seconds when the TV is turned on for the first time
after the power was turned off by "No signal for 10 minutes" feature. The on-screen display will
flash 3, 2 and 1 to indicate the last three (3) remaining minutes prior to the shutoff.
Setup
Eco navigation
Set to Eco: Sets the TV to the most suitable energy-saving mode automatically.
Optimizes the TV's various modes to save energy.
•
The TV's brightness will adjust and adapt as the room lighting changes.
PC Setup
Adjusts and sets to display PC screen on the TV. (p. 18)
Parental control
Change password
Create a new password. Input the new 4-digit password twice.
Mode
Sets program lock status. “V-chip” technology enables restricted shows to lock according to TV
ratings.
(On/Off)
On: Set each rating level. (MPAA, U.S.TV, C.E.L.R., C.F.L.R.) (p. 39)
Program
Prohibits viewing of TV content based on the rating provided by the broadcasters.
