Panasonic th-32ef1u Operating Instructions (Functional Manual) Download Page 63

Page: 63 / 90

English

Command

Control

ERST?

Error status query

First byte: 0
Second byte: 0
Third byte: 0
Fourth byte: 0
Fifth byte: 0
Sixth byte: Other error. 0 or 2.

●

Meaning of 0, 2.
0: Error is not detected,
2: Error

LAMP?

Lamp status query

Not supported

INST?

Input switch list query

11:  PC IN input (PC)
21:  VIDEO input (VIDEO)
31:  HDMI 1 input (HDMI1)
32: HDMI 2 input (HDMI2)
33:  DVI-D IN input (DVI-D)
41:  USB input (USB)

NAME?

Display name query

The name selected in [Display name]

is returned.

INF1?

Manufacturer name query

Returns “Panasonic”.

INF2?

Model name query

Returns “32EF1U”.
(Example: 32-inch EF1U model)

INFO?

Other information query

Returns version number.

CLSS?

Class information query

Returns “1”.

PJLink security authentication

The password used for PJLink is the same as the

password set for the WEB control. (see page 65)
When using PJLink without security authorization, set

use without the password for administrator privileges

and the password for user privileges of Web browser

control.

●

Concerning the specification of PJLink, see the web

site of Japan Business Machine and Information

System Industries Association (JBMIA) below:
http://pjlink.jbmia.or.jp/english/index.html

Early Warning Software

This unit supports “Early Warning Software” which

monitors the statuses of devices (projectors or flat-panel

displays) connected to an intranet, reports failures of

devices and gives advance warning by detecting a

predicted abnormality.
The maximum number of devices that can be registered

to monitor differs according to the type of license. Up

to 2048 devices can be registered and used for free for

a maximum of 90 days after the installation to PC has

completed.

●

For more details, visit the following web site.
http://panasonic.net/prodisplays/products/et-swa100/index.html

Multi Monitoring & Control Software

This unit supports “Multi Monitoring & Control Software”

which monitors and controls devices (projectors or flat-

panel displays) connected to an intranet.
For details, see the following website.
http://panasonic.net/prodisplays/download/software/index.html

Video Wall Manager

This unit supports the “Video Wall Manager” software

which adjusts multiple displays simultaneously or

separately on one computer without rearranging cables.
For more details, visit the following web site.
http://panasonic.net/prodisplays/download/software/

index.html

Note

●

This unit does not support Auto Display Adjustment

Upgrade Kit (TY-VUK10).

Summary of Contents for th-32ef1u



























































































Search results

Summary of Contents for th-32ef1u

Reviews:

Related manuals for th-32ef1u

Brands by name

Popular brands

Panasonic th-32ef1u, Operating Instructions (Functional Manual)

Search results

Summary of Contents for th-32ef1u

Reviews:

Related manuals for th-32ef1u

Brands by name

Popular brands