Panasonic th-32ef1u Operating Instructions (Functional Manual) Download Page 58

Page: 58 / 90

English

Using Network

Function

This unit has a network function and you can control the

Display connected to the network using your computer.

Necessary environment for

computers to be connected

First of all, confirm your computer whether it has a wired

LAN.
Before connecting the Display to the computer, be sure

to check the following settings.

Check 1: About LAN cable

●

Connect the cable properly.

●

Use LAN cable that is compatible with category 5 or

above.

Check 2: Wired LAN settings

Computer with a built-in wired LAN function

●

Switch on the wired LAN.

Computer without a built-in wired LAN function

●

Check that your wired LAN adapter is recognized

properly and it is switched on.

●

Install the wired LAN adapter driver beforehand.
For details on how to install the driver, refer to the

instructions accompanying the wired LAN adapter.

■

About Web Browser

Web Browser is necessary to use WEB control.

●

Compatible OS:
Windows, Mac OS

●

Compatible Web Browser:
Internet Explorer 7.0 / 8.0 / 9.0 / 10.0 / 11.0

(Windows)
Safari 4.x / 5.x / 6.x (Mac OS)

Example of network connection

Note

●

To use the network function, set each item in

[Network settings] and make sure to set [Network

control] to [On].
(see page 48)
When it is set to [On], power indicator lights orange

under the condition of power “Off” with remote control

(stand-by state).

■

LAN Terminal connection

Display (Back of the unit)
PC
LAN Terminal
LAN cable (commercially available)
Hub or broadband router

Note

●

For LAN cable, use shielded cable, otherwise picture

noise may be caused.

●

Make sure the broadband router or hub supports

10BASE-T/100BASE-TX.

●

Touching the LAN Terminal with a statically charged

hand (body) may cause damage to the device due to

its discharge.
Do not touch the LAN Terminal or the metal part of

the LAN cable.

●

For instructions on connection, consult your network

administrator.

Command control

Network function of the unit can control the unit in the

same way as serial control from a network.

Supported commands

Commands used in the serial control are supported.

(see page 20)

Summary of Contents for th-32ef1u



























































































Search results

Summary of Contents for th-32ef1u

Reviews:

Related manuals for th-32ef1u

Brands by name

Popular brands

Panasonic th-32ef1u, Operating Instructions (Functional Manual)

Search results

Summary of Contents for th-32ef1u

Reviews:

Related manuals for th-32ef1u

Brands by name

Popular brands