background image

Pick-up device:

768 (H) x 494 (V) pixels, interline transfer CCD

Scanning area:

4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of
1/3" pick-up tube)

Scanning:

525 lines/60 fields/30 frames

Horizontal:

15.734 kHz

Vertical:

59.94 Hz

Synchronization:

Multiplexed vertical drive (VD2), Line-locked, 
VBS/ VS, or Internal

GEN LOCK input

VBS/VS 1.0 V[P-P] composite 75 

/BNC connector

Video output:

1.0 V[P-P] NTSC composite 75 

/BNC connector

Resolution:

Horizontal 480 TV lines (C/L Normal), 540 TV lines
typ., 520 TV lines min. (C/L High), 570 TV ines
(B/W)
Vertical 350 TV lines (at center)

Signal-to-noise ratio:

50 dB (Equivalent to AGC Off, weight On)

Dynamic range:

52 dB typ

Minimum illumination:

0.6 lx {0.06 footcandle} at F1.4 (C/L), 
0.5 lx {0.05 footcandle} at F1.2 (C/L), 
0.08 lx {0.008 footcandle} at F1.4 (B/W), 
0.06 lx {0.006 footcandle} at F1.2 (B/W)

Lens mount:

CS-mount

Major items on menu setup 

Language:

English, French, German, Spanish, Italian,
Japanese, Russian, or Chinese

Camera ID:

Up to 16 characters

Light control

ALC/ELC

Super Dynamic 3:

ON or OFF

Electronic shutter speed:

1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000,1/2 000,
1/4 000, 1/10 000 s 

Gain control:

ON (HIGH), ON (MID), ON (LOW), or OFF

Sensitivity enhancement:

OFF, x2AUTO, x4AUTO, x6AUTO, x10AUTO, x2FIX,
x4FIX, x6FIX, x10FIX, x16FIX, x32FIX

White balance:

ATW1, ATW2, or AWC

Motion detection:

MODE1, MODE2, or OFF

Digital noise reduction:

High or Low

Resolution:

Normal or High

Black-and-white mode:

AUTO1, AUTO2, EXT, ON, or OFF

Privacy zone:

ON(1), ON(2), or OFF

Mirror:

ON or OFF

ALC lens drive:

DC or Video

Auto image stabilizer

ON or OFF

Back focus adjustment:

ABF, MANUAL, AUTO/PRESET/FIX

Special:

Chroma, Aperture, Pedestal, HUE adjustable

Ambient Operating Temperature:

–10 °C - +50 °C {14 °F - 122 °F}

Ambient Operating Humidity:

Less than 90 %

Power Source and Power Consumption: WV-CP480: 120 V AC 60 Hz, 4.8 W

WV-CP484: 24 V AC 60 Hz, 4.7 W
WV-CP484: 12 V DC, 410 mA

Dimensions (without lens):

WV-CP480: 70 mm (W) x 65 mm (H) x 129 mm (D)
WV-CP480: 2-3/4" (W) x 2-9/16" (H) x 5-1/16" (D)
WV-CP484: 67 mm (W) x 65 mm (H) x 100 mm (D)
WV-CP484: 2-5/8" (W) x 2-9/16" (H) x 3-15/16" (D)

Weights (without lens):

WV-CP480: 520 

g

{1.1 lbs.} (Without power cord)

WV-CP484: 400 

g

{0.9 lbs.}

Weights and dimensions indicated are approximate.
Specifications are subject to change without notice.

SPECIFICATIONS

OPTIONAL ACCESSORIES

Lenses :

WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LZ61/15, WV-LZA61/2S,
WV-LZ62/8S, WV-LF4R5C3A, WV-LF9C3A, WV-LZF61/2

STANDARD ACCESSORIES

Operating Instructions (this document).......................1 pc.
Warranty Card  ............................................................ 1 pc
Important Safety Instructions ...................................... 1 pc

The following are for installation.

AC Power Cord (for WV-CP480)..................................1 pc.

© 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.

Panasonic System Solutions Company, 

Unit Company of Panasonic Corporation of North America

Security Systems

www.panasonic.com/security
For customer support, call 1.877.733.3689

Executive Office: 

Three Panasonic Way 2H-2, Secaucus, New Jersey 07094

Zone Office
Eastern: 

Three Panasonic Way, Secaucus, New Jersey 07094

Central: 

1707 N. Randal Road, Elgin, IL 60123

Southern: 

1225 Northbrook Parkway, Suwanee, GA 30024

Western: 

6550 Katella Ave., Cypress, CA 90630

Panasonic Canada Inc.

5770 Ambler Drive,Mississauga, 
Ontario, L4W 2T3 Canada (905)624-5010
http://www.panasonic.ca

Panasonic Sales Company

Division of Panasonic Puerto Rico Inc.

San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina
P.R. 00985(809)750-4300

Summary of Contents for Super Dynamic III WV-CP480













Reviews: