Panasonic Super Dynamic II WV-CS854B Operating Instructions Manual Download Page 49

Page: 49 / 56

-49-

3. Hook the fall prevention wire on the camera

mounting base.

Cautions:

• Use the supplied dust protection sheet if the camera

mounting base is liable to be exposed to a dusty
atmosphere. Remove the cover from the dust
protection sheet, then stick the sheet on the camera
mounting base.

• Remove the sheet before mounting the camera on

the base.

• While the camera is separated from the base, keep

the camera in the supplied polyethylene sack.

4. Mount the camera on the camera mounting base

and rotate the camera clockwise.

5. Tighten the fixing screw M3 (provided).

Notes:

(1) Tighten the camera fixing screw with a

screwdriver.

(2) Follow the instructions given here to ensure that

the camera and camera mounting base are
installed safely.

(3) When removing the camera from the camera

mounting base, loosen and press up the camera
fixing screw (M3) with a screwdriver.

6. Fix the decoration cover to the camera mounting

base.

a. Sideway Cable Exit

Pass the cables through the cutout made in the
diecast case and decoration cover.

b. Top Cable Exit

Push the decoration cover against the camera
mounting base.

Be sure to match the wire with the fall
prevention wire fixing angle as shown below.

Fall prevention
wire fixing angle

Ring of the
fall prevention
wire

Summary of Contents for Super Dynamic II WV-CS854B

























































Search results

Summary of Contents for Super Dynamic II WV-CS854B

Reviews:

Related manuals for Super Dynamic II WV-CS854B

Brands by name

Popular brands

Panasonic Super Dynamic II WV-CS854B, Operating Instructions Manual

Search results

Summary of Contents for Super Dynamic II WV-CS854B

Reviews:

Related manuals for Super Dynamic II WV-CS854B

Brands by name

Popular brands