Panasonic Super Dynamic II WV-CS854B Operating Instructions Manual Download Page 35

Page: 35 / 56

-35-

●

Light Control Setting (ALC/MANUAL)

1. Move the cursor to ALC/MANUAL and select ALC

or MANUAL with the joystick. When you select ALC,
set backlight compensation.

Note:

The backlight compensation submenu

associated with this menu is described
separately and should be set up after installing
the camera at the site and observing the actual
site picture.

2. When MANUAL is selected, quit the setup menu by

pressing the MON (ESC) key. Press the OPEN or
CLOSE key on the controller for iris adjustment.

(1) ALC Mode with SUPER-D2 ON

1. Press the CAM (SET) key after selecting ALC. The

ALC CONT menu appears.

2. Move the cursor to the SUPER-D2 parameter and

select ON.

3. If you want to adjust the video output level, move

the "I" cursor for LEVEL. Adjust it to the desired level
with the joystick.

4. Move the cursor to RET and press the CAM (SET)

key to return to the CAM SET UP menu. To return to
the camera picture, press the F4 button.

(2) ALC Mode with SUPER-D2 OFF

1. Move the cursor to SUPER-D2 and select OFF.

(When you select MANUAL, SUPER-D2 is not
available.) MASK SET appears on the menu.

2. Move the cursor to MASK SET and press the CAM

(SET) key. The 48 mask areas appear on the
monitor screen. The cursor is blinking in the top left
corner of the screen.

3. To mask an area where backlight is bright, move

the cursor to the area and press the CAM (SET)
key. The mask turns white. Repeat this procedure to
mask the desired areas.

4. To cancel a masked area, move the cursor to the

area, and press the CAM (SET) key. To cancel all
masking areas, press the F2 button of WV-CU550C.
For WV-RM70, press the right and left switches
simultaneously.

5. After masking is completed, press the MON (ESC)

key. The 48 mask areas on the monitor screen
disappear and the ALC CONT menu appears.

** SET UP **
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE

RET SPECIAL2

OFF
ALC
AUTO
ON(MID)
OFF
INT
ATW1
OFF
AUTO L

** ALC CONT **
BACK LIGHT COMP

SUPER-D2

MASK SET

LEVEL

RET

OFF

••••

- +

** ALC CONT **
BACK LIGHT COMP

SUPER-D2

LEVEL

RET

••••

- +

Blinking

Turns to white

Summary of Contents for Super Dynamic II WV-CS854B

























































Search results

Summary of Contents for Super Dynamic II WV-CS854B

Reviews:

Related manuals for Super Dynamic II WV-CS854B

Brands by name

Popular brands

Panasonic Super Dynamic II WV-CS854B, Operating Instructions Manual

Search results

Summary of Contents for Super Dynamic II WV-CS854B

Reviews:

Related manuals for Super Dynamic II WV-CS854B

Brands by name

Popular brands