Panasonic Super Dynamic II WV-CS854B Operating Instructions Manual Download Page 40

Page: 40 / 56

-40-

• The alarm signal will take approx. 0.2 seconds to

reach the alarm terminal of the VCR after the camera
detects the object.
Because the alarm signal is multiplexed on the
video signal, it may be mistakenly interpreted by
other video equipment as a time code signal.
Therefore, when this camera is not used in a
Panasonic Intelligent CCTV System, select OFF to
prevent the above from occurring.

●

Auto Focus Setting (AF MODE)

1. Move the cursor to AF MODE, and select the

following mode with the joystick. S, M and L stand
for Small, Middle and Large areas respectively in
the center of a scene that are used for sensing
sharpness in auto-focusing.

MANUAL S, M, L:

Auto focus is activated only when

the AF key on the controller is pressed.

AUTO S, M, L:

Auto focus is activated automatically

while the pan, tilt or zoom operation is manually
performed. These may be selected in the same
way as MANUAL by pressing the AF key on the
controller.

2. To confirm auto-focus operation, press CAM (SET)

key.

Notes:

• When the electronic sensitivity enhancement (SENS

UP) is activated except in the x2 FIX or x2 AUTO
mode, this function is automatically set to MANUAL
(S, M, L).

• The auto focus lens does not function properly in the

AUTO mode after using the WIDE lens.

• The auto focus lens may not function properly in the

AUTO mode under the following conditions.

1. Dirt or water on window glass.

The auto focus may focus on the dirt or water.

2. Low lighting or illumination.
3. Bright objects or high intensity objects.
4. Single color object such as a white wall or fine

felt

5. No center objects and sloping objects
6. Far and near objects on the screen

●

Special 2 Menu (SPECIAL2)

This menu lets you adjust and set up the picture quality
to meet your requirements.
Move the cursor to SPECIAL2 and press the F2 button
of WV-CU550C. The special menu appears on the
monitor screen. For WV-RM70, hold down the right and
left switches simultaneously for 2 seconds or more.

• Chroma Level (CHROMA GAIN)

Aperture Level (AP GAIN)
Pedestal Level (PEDESTAL)
Hue Level Setting (HUE)

1. Move the cursor to CHROMA GAIN, and the "I"

cursor is highlighted.

2. Move the "I" cursor to your desired position with the

joystick and press the CAM (SET) key to confirm the
level.

Notes:

• For setting the aperture, pedestal and hue levels,

perform the same steps described above (but in the
step 1, move the cursor to AP GAIN for the aperture
level, to PEDESTAL for the pedestal level and to
HUE for the hue level.).

• To reset the settings to the factory default, press the

F2 button of WV-CU550C/CJ. (For WV-RM70, hold
down the right and left switches simultaneously for 2
seconds or more.)

• Resolution (RESOLUTION)

Move the cursor to RESOLUTION and move the
joystick to select NORMAL or HIGH.

** SET UP **
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE

RET SPECIAL2

OFF
ALC
AUTO
ON(MID)
OFF
INT
ATW1
OFF
AUTO L

AUTO S

AUTO M

AUTO L

MANUAL L

MANUAL M