12
© Panasonic Industriar Devices SUNX Co., Ltd. 2016
Mounting / Removal
2-3 Mounting / Removal
2-3-1 Mounting / Removal of Controller
The controller can be mounted on the 35mm width DIN rail.
<Mounting method>
Step 1 Fit the tab on the opposite side of the DIN rail stopper into the 35mm width DIN rail.
Step 2 Press down the tab on the other side against the 35mm width DIN rail to fit it.
<Removing method>
Step 1
Insert a flathead screwdriver to the groove on the DIN rail stopper and pull out the stopper.
Step 2 Push the controller to the other side of the DIN rail stopper.
Step 3 While maintaining the condition in the procedure 2, lift up the controller to remove it.
Take care that if the controller is lifted with the stopper remained inside, the tabs
crack
2
3
1
DIN rail stopper
35mm width DIN rail
2
3
1
DIN rail stopper
Flathead screwdriver
1
