55
© Panasonic Industrial Devices SUNX Co., Ltd. 2012 MJEC-SF4B01V2 No.0027-44V
English
When this device is used as a safety equipment for press machines in Japan, a pre-work
inspection and periodic inspection must be carried out by the press machine work supervisor
or by the person in charge of the matters listed in Provision 134, No. 1, 2 and 4 of the Ordi-
nance on Labor Safety and Hygiene. The press machine work supervisor, etc., must inspect
the following matters before starting work, and must record and save the results.
Emitter of this device
Security of mounting
Adequacy of mounting position (safety distance and vertical position)
Presence of damage
Presence of abnormality in external wires
Presence of contamination on emitter
Security of detection state
Receiver of this device
Security of mounting
Adequacy of mounting position (safety distance and vertical position)
Presence of damage
Presence of abnormality in external wires
Presence of contamination on receiver
Security of detection state
Exclusive control unit SF-C11 / SF-C13
Exclusive application expansion unit SF-C14EX-01
External wiring
Indicators
Presence of abnormal operation with switches, etc.
Security of mounting
Refer to “Policy on Press Machine Safety Equipment Control” (Ministry of Labor and Welfare,
Basic Publication No. 446-2, issued on July 9, 1993) for details.