94
VQT3E42
With a PC
Setup
2
Connecting to a PC
≥
Connect this unit to the PC after the software applications are installed.
≥
Remove the supplied CD-ROM from your PC.
A
USB cable (supplied)
1
Connect this unit to the AC
adaptor.
≥
It is possible to use the unit connected to
the PC with the batteries only, but you will
not be able to write data into the unit.
≥
Use the AC adapter to free you from
worrying about the battery running down.
2
Turn on the unit.
≥
This function is available in all modes.
≥
When using the battery, the LCD monitor
will be turned off after about 5 seconds.
Operating the joystick will cause the LCD
monitor to turn on again.
3
Connect this unit to a PC.
≥
Insert the USB connectors as far as they
will go.
≥
Do not use any other USB cables except
the supplied one. (Operation is not
guaranteed with any other USB cables.)
≥
The Smart wizard screen is automatically
displayed when VideoCam Suite 3.5 is
installed.
≥
This unit is automatically recognized as an
external drive of the PC. (
l
97)
≥
A USB function selection screen will be
displayed if VideoCam Suite 3.5 has not
been installed. Use the joystick to select
[PC], then press the center of the
joystick.When you select an option other
than [PC], reconnect the USB cable.
≥
When Windows is used as the PC
operating system, a message prompting
to format may display when a SDXC card
is read. (Please be aware that if a media is
formatted, then all the data recorded on
the media will be erased.)
http://panasonic.net/avc/sdcard/
information/SDXC.html
SDR-H100&S71&S70&T70-VQT3E42_eng.book 94 ページ ２０１０年１１月２９日 月曜日 午後６時２１分
Summary of Contents for SDR S7 - Flash Memory Camcorder
Page 131: ...131 VQT3E42 ...
