24
VQT3E42
Caution:
Check that the access lamp has gone off.
1
Open the LCD monitor.
2
Open the SD card cover and insert (remove) the SD card into (from)
the card slot.
≥
Face the label side
B
in the direction shown in the illustration and press it straight in as far
as it will go.
≥
Press the center of the SD card and then pull it straight out.
3
Securely close the SD card cover.
≥
Do not touch the terminals on the back of the SD card.
≥
See page 113 for details on handling the SD card.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (
l
76) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp [ACCESS]
A
≥
When this unit is accessing the SD card or built-in memory, the access lamp lights up.
SDR-H100&S71&S70&T70-VQT3E42_eng.book 24 ページ ２０１０年１１月２９日 月曜日 午後６時２１分
Summary of Contents for SDR S7 - Flash Memory Camcorder
Page 131: ...131 VQT3E42 ...
