109
VQT3E42
When connected by
the USB cable, this
unit is not detected by
the PC.
≥
After re-inserting the SD card into the unit, reconnect
the supplied USB cable.
≥
Select another USB terminal on the PC.
≥
Check the operating environment. (
l
89, 99)
≥
Connect the supplied USB cable again after
restarting the PC and turning on this unit again.
When connected by
the USB cable, this
unit is not detected by
the other devices.
≥
When connected to other devices using only the
battery, reconnect using the AC adaptor.
When the USB cable is
disconnected, an error
message will appear
on the PC.
≥
To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions
on the screen.
The power of the DVD
burner cannot be
turned on.
≥
When the unit is connected to the DVD burner, use
the respective AC adaptors for both this unit and the
DVD burner.
The sound does not
play back properly
when a DVD disc that
has been copied using
the DVD burner is
played back.
≥
When the scenes recorded on an SD card by setting
[AUDIO REC] to [MPEG] are copied to a DVD disc
using the DVD burner and then played back with any
other devices, sound may not play back properly.
In this case, record scenes by setting [AUDIO REC]
to [DOLBY] and then copy to the disc. Or use the
software supplied with this unit to copy the scenes.
Cannot see the PDF
operating instructions
for VideoCam Suite
3.5.
≥
You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for VideoCam Suite 3.5.
Problem
Check points
SDR-H100&S71&S70&T70-VQT3E42_eng.book 109 ページ ２０１０年１１月２９日 月曜日 午後６時２１分
Summary of Contents for SDR S7 - Flash Memory Camcorder
Page 131: ...131 VQT3E42 ...
