RQTV021
1
4
Step 22
- DEMO function
- DEMO function
When the unit is fi rst plugged in, a demonstration of its functions may be
shown on the display.
If the demo setting is off, you can show a demonstration by selecting
“DEMO ON”.
Press and hold [
7
, –DEMO].
The display changes each time the button is held down.
$%-//&&
$%-//.
While in standby mode, select “DEMO OFF” to reduce power
consumption.
Getting started
Step 1
Step 1
- Making the connections
- Making the connections
Connect the AC mains lead only after all other connections have been made.
To household
mains socket
1
Connect the speaker cables.
Red (
ª
)
Black (
·
)
Red (
ª
)
Black (
·
)
Incorrect connection can damage the unit.
2
Connect the antenna.
Stand the AM loop antenna up on its base.
Keep the loose antenna cord away from
other wires and cords.
Tape the FM indoor antenna to a wall or
column, in a position with least amount of
interference.
FM indoor antenna
Adhesive tape
AM loop antenna
3
Connect the AC mains lead.
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 3 BEFORE CONNECTION.
The included AC mains lead is for use with this
unit only. Do not use it with other equipment.
Insertion of connector
Connector
Even when the connector is perfectly inserted,
depending on the type of inlet used, the front part of
the connector may jut out as shown in the drawing.
However there is no problem using the unit.
Appliance inlet
PM4_EB_En.indd 4
PM4_EB_En.indd 4
1/31/07 2:41:32 PM
1/31/07 2:41:32 PM
