RQTV021
1
9
Sound adjustment
Selecting sound effects
Selecting sound effects
You can change the sound effect by selecting Preset EQ or
adjusting the bass or treble effect.
Preset EQ
Preset EQ
Press [PRESET EQ] repeatedly to select your desired
setting.
HEAVY
→
CLEAR
→
SOFT
→
VOCAL
→
EQ-OFF
Setting
Effect
HEAVY
Adds punch to rock
CLEAR
Clarifi es higher frequencies
SOFT
For background music
VOCAL
Adds gloss to vocal
EQ-OFF
No effect
Bass or treble
Bass or treble
Enable you to enjoy the lower or higher pitch sound.
1
Press [BASS/TREBLE] repeatedly to select your
desired setting.
BASS
TREBLE
original display
Setting
Effect
BASS
For lower pitch sound
TREBLE
For higher pitch sound
2
Press [ /
4
] or [ /
¢
] to adjust the level.
Note
The tone level can be varied within -4 to +4.
Enjoying surround sound
Enjoying surround sound
Enable you to add natural width and depth to the stereo
sound.
To activate
Press [SURROUND] to display “
” indicator.
To cancel
Press [SURROUND] again to clear “
” indicator.
Note
• Surround-sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the
surround-sound effect.
External unit
Connecting to a portable audio equipment
Connecting to a portable audio equipment
This feature enables you to enjoy music from portable audio
equipment.
MUSIC PORT
Audio cord (not included)
Portable audio equipment
(not included)
Playing from portable audio
Playing from portable audio
equipment
equipment
Switch off the equalizer function (if there is any) of the
portable audio equipment before you plug into the MUSIC
PORT jack. Otherwise, sound from the speaker may be
distorted.
1
Plug the audio cord into the MUSIC PORT jack and
press [MUSIC PORT].
2
Play the portable audio equipment. (See the
portable audio equipment’s instruction manual.)
Note
All peripheral components and cables are sold separately.
Changing the remote control code
Changing the remote control code
Change the code if you fi nd the remote control unintentionally
also controls other equipments.
Change the main unit’s code
Change the main unit’s code
Press and hold [MUSIC PORT] on the main unit and then
press and hold [2] (or [1]) on the remote control.
“REMOTE 2” is displayed.
Change the remote control’s code
Change the remote control’s code
Press and hold [ENTER] and [2] (or [1]) on the remote
control for at least 2 second.
If the remote control and main unit are using different codes,
a message appears on the main unit’s display showing the
main unit’s current code. Follow the above step to change
the remote control’s code to match it.
PM4_EB_En.indd 9
PM4_EB_En.indd 9
1/31/07 2:41:58 PM
1/31/07 2:41:58 PM
