59
RQT7621
INF
O
Error messages
On the television
Page
On the unit’s display
Cannot finish recording
completely.
≥
The programme was copy-protected.
≥
The HDD or disc may be full.
—
—
Cannot playback this title.
TV system is different from the
setting.
To playback this title, please
change the TV System in
SETUP.
≥
You tried to play a title recorded using a different encoding system from that of the TV
system currently selected on the unit.
Alter the “TV System” setting on this unit to suit.
52
Cannot record on the disc.
≥
The disc may be dirty or scratched.
56
Please check the disc.
Unable to format.
Cannot record. Disc is full.
≥
Create space by erasing any unnecessary titles.
[HDD] [RAM]
≥
Use a new disc.
[RAM]
[DVD-R]
30, 35, 43
—
Cannot record. Maximum
number of titles recorded.
Error has occurred. Please
press ENTER.
≥
Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering
(“SELF CHECK” appears on the unit’s display).
—
No Disc
≥
The disc may be upside down.
—
Please change the disc.
≥
There may be a problem with the disc. Press [
<
OPEN/CLOSE] on the main unit to
remove it and check it for scratches or dirt. (The unit turns off automatically after you open
the tray.)
56
This is a non-recordable disc.
≥
The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R.
≥
You inserted an unformatted DVD-RAM. Format the disc with this unit.
—
43
This disc is not properly
formatted.
Formatting is necessary using
DISC MANAGEMENT.
$
≥
The operation is prohibited by the unit or disc.
—
HDD SLP
≥
In order to extend HDD life, the HDD is in SLEEP mode. Press [HDD] to activate.
21
HARD ERR
≥
If there is no change after turning the unit on and off, consult the dealer where the unit was
purchased.
—
NO READ
≥
The disc is dirty or badly scratched. The unit cannot record, play, or edit.
≥
You have used a DVD-RAM/PD lens cleaner and it has finished. Press [
<
OPEN/CLOSE]
on the main unit to eject the disc.
56
—
PLEASE WAIT
≥
Displayed when the unit is started. This is not a malfunction.
—
PROG FULL
≥
There are already 32 timer programmes. Delete unnecessary timer programmes.
27
REMOTE DVD
(“
∑
” stands for a number.)
≥
The remote control and main unit are using different codes. Change the code on the
remote control.
Press and hold [ENTER] and the indicated
number button at the same time for more than
2 seconds.
19
SELF CHECK
≥
The unit is starting up. Wait until the message disappears.
—
U14
≥
The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan
on the rear of the unit.
—
U99
≥
The unit fails to operate properly. Press [
Í
/I] on the main unit to switch the unit to standby.
Now press [
Í
/I] on the main unit again to turn the unit on.
—
UNSUPPORT
≥
You have inserted a disc the unit cannot play or record on.
≥
The signal input into the OPTICAL IN terminal is not Dolby Digital or Linear PCM.
20
—
X HOLD
≥
The Child Lock function is activated.
Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.
56
AF F61
≥
Check and correct the speaker cord connections.
If this does not fix the problem, there is a power supply problem. Consult the dealer.
7, 9
DIGITAL UNLOCK
≥
There is no signal input to the OPTICAL IN terminal.
➡
Make sure to check the connections and if the power of the connected equipment is
turned on.
—
HT1500_EB.book 59 ページ ２００４年５月２８日 金曜日 午後１時４１分
