53
RQT7621
INF
O
Optional connections
≥
Before connection, turn off all equipment and read the appropriate
operating instructions.
≥
The equipment connections described are examples.
≥
Peripheral equipment and optional cables sold separately unless
otherwise indicated.
If your digital receiver has an OPTICAL OUT terminal you can
connect with this unit’s OPTICAL IN terminal to enjoy digital audio
including multi-channel Dolby Digital. Refer to your digital receiver’s
operating instructions for details.
[Note]
You cannot record digital audio received using the optical
connection. Make certain to also connect to the AV2 Scart terminals
when using the OPTICAL IN terminal connection.
Preparation
Press [HDD] or [DVD] to select “HDD” or “DVD” as the source.
1
Press [HDD/DVD INPUT] to select “A2”.
You can select the input channel by pressing [
W
X
CH].
2
Press [SHIFT]
i
[AV2/OPT] to select
audio input.
A2 ANALOG (factory preset): Audio input into the AV2 Scart
f
terminal is output to the
v
speakers.
A2 OPT: Audio input into the OPTICAL IN terminal is
output to the speakers.
∫
Audio reception setting
While “A2 OPT” is displayed on the unit’s display
Press and hold [SHIFT]
r
[AV2/OPT].
A2 AUTO (factory preset): When receiving Dolby Digital and PCM
;:
signals
A2 PCM FIX: When receiving only PCM audio
∫
When receiving Dolby Digital Dual Mono signals
You can change the audio mode.
Press [SHIFT]
i
[AUDIO].
M1/M2
>
M1
>
M2
^---------------------}
[Note]
You cannot use Dolby Pro Logic
II
or Down-mix function.
∫
Dynamic range compression
You can change this setting to listen to Dolby Digital sound at low
volume (such as late at night) and maintain audio clarity. It reduces
the peak level in loud scenes without affecting the sound field.
Press and hold [SHIFT]
i
[AUDIO] for
about 2 seconds.
A.
DR COMP OFF (factory preset): The original dynamic range.
l
;
l
DR COMP STD: The level recommended for household viewing.
l
;
a-
DR COMP MAX: The maximum allowable compression
(recommended for night viewing).
∫
Recording audio from discs or television
broadcasts to a tape deck
1 Discs: Press [HDD] or [DVD] to select “HDD” or “DVD” as the source.
Television broadcasts: Press [
W
X
CH] to select the channel.
2 Start recording and play.
Refer to the manual of the other unit for details.
∫
To playback audio from a tape deck, etc.,
through this unit’s speakers
1 Press [HDD] or [DVD] to select “HDD” or “DVD” as the source.
2 Press [HDD/DVD INPUT] to select “A4”.
3 Start play.
1 Press [AUX] to select “AUX” as the source.
2 Turn on the television and select the channel.
3 Adjust the volume on this unit.
≥
Set TV volume minimum.
Receiving digital audio using the
optical connection
When “A2 OPT” is selected
CH
VOLUME
SKIP
SLOW/SEARCH
CANCEL
1
2
3
4
5
6
7
8
9
0
HOME THEATER
TV
AV
AUX
FM/AM
DVD
HDD
DISPLAY
DIRECT TV REC
PROG/CHECK
HDD/DVD INPUT
-/--
EXT LINK
MULTI REAR
DUBBING
S.POSITION
CREATE CHAP
C.FOCUS
REC MODE
ERASE
TIMER
TIME SLIP
AV2/OPT
MIX
2CH
REC
TEST
MANUAL SKIP
REPEAT
MUTING
PRO LOGIC
VIDEO Plus +
SHIFT
SHIFT
STATUS
EQ/SFC
PROG/CHECK
PROG/CHECK
AUDIO
S W. LEVEL
F
A
B
C
D
SHIFT
SHIFT
AUDIO
W X
CH
AUX
HDD/DVD INPUT
AV2/OPT
HDD, DVD
OUT
OPTICAL
IN
R-AUDIO-L
R-AUDIO-L
AV4 IN
LOOP
ANT
GND
LOOP
EXT
A
AM ANT
FM ANT
Y
P
B
P
R
COM
VID
(PRO
INT
AV1 (TV)
AV2 (DECODER/EXT)
VIDEO
S-VIDEO
S-VIDEO
VIDEO
OPTICAL
OUT
Digital receiver
Optical digital audio
cable
Do not bend sharply.
Insert fully, with
this side facing
up.
21-pin Scart
lead
Main unit
Connecting other audio equipment
FM/AM broadcasts and audio from the OPTICAL IN and AUX
terminals are not output through the AUDIO OUT terminals.
Enjoying TV broadcast with surround sound
OUT
OPTICAL
IN
R-AUDIO-L
R-AUDIO-L
AV4 IN
LOOP
ANT
GND
LOOP
EXT
A
AM ANT
VIDEO
S-VIDEO
S-VIDEO
VIDEO
REC IN
R
L
PLAY OUT
R
L
Tape deck
red
white
red
white
red
white
red
white
For recording
For play
Audio cable
Main unit
Y
L
AUX
RF IN
RF OUT
P
B
P
R
COMPONENT
VIDEO OUT
(PROGRESSIVE/
INTERLACE)
R
TV)
DER/EXT)
AUX
R
L
AUDIO OUT
L
R
Television
Audio cable
red
white
white
red
Main unit
HT1500_EB.book 53 ページ ２００４年５月２８日 金曜日 午後１時４１分
