Panasonic SA-PT875GA, Service Manual

Page: 65 / 165

65
Caution: During assembling of AC Inlet P.C.B., ensure the
P.C.B. is seated properly at the locators.
9.13. Disassembly of Main P.C.B.
• Follow (Step 1) to (Step 3) of Item 9.3.
Step 1 Remove 3 screws at the rear panel.
Step 2 Remove 2 screws on Main P.C.B.
Step 3 Remove 2 ground springs on Main P.C.B.
Caution: Keep the ground springs in safe place. Avoid
denting it. Place it back during assembling.
Step 4 Detach 14P FFC at the connector (CN6003) on the
Main P.C.B.
Step 5 Detach 7P cable at the connector (CN2010) on the Main
P.C.B.
Step 6 Detach 19P FFC at the connector (CN2007) on the
Main P.C.B.
Step 7 Detach 10P FFC at the connector (CN2005) on the
Main P.C.B.
Step 8 Slightly detach Main P.C.B. from rear panel in the direc-
tion of arrow.
Caution: When detaching Main P.C.B. from rear panel, be
careful of 2 catches at the rear panel.
Step 9 Slightly move the Main P.C.B. up as diagram shown.
Step 10 Detach 16P FFC at the connector (CN2003) on the
Main P.C.B.
Step 11 Detach 14P cable at the connector (CN2016) on the