Panasonic SA-PT875GA, Service Manual

Page: 77 / 165

77
Caution: Ensure the heatsink unit B with rectifier diode
(D5702) are properly seated on SMPS P.C.B.
Step 5 Solder pins of the rectifier diode (D5702) on the solder
side of SMPS P.C.B.
Step 6 Solder pins of the heatsink unit B on the solder side of
SMPS P.C.B.
Caution: Ensure pins of the rectifier diode (D5702) are
properly seated and soldered on SMPS P.C.B.
9.24. Replacement of Regulator
Diode (D5801)
9.24.1. Disassembly of Regulator Diode
(D5801)
• Follow (Step 1) to (Step 3) of Item 9.3.
• Follow (Step 1) to (Step 11) of Item 9.6.
• Follow (Step 11) to (Step12) of Item 9.13.
• Follow (Step 1) to (Step 9) of Item 9.20.
Step 1 Desolder pins of the regulator diode (D5801) on the sol-
der side of SMPS P.C.B.
Step 2 Remove 1 screw from the regulator diode (D5801).
Step 3 Remove the regulator diode (D5801) from the SMPS
P.C.B.
Caution: Handle the heatsink unit C with caution due to its
high temperature after prolonged use. Touching it may
lead to injuries.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.5) for
location of the electrical components.