Panasonic SA-PT875GA, Service Manual

Page: 89 / 165

89
Step 31 Release P.C.B. spacer.
Step 32 Remove the P.C.B. bracket.
Caution: Keep the P.C.B. bracket in safe place. Avoid dent-
ing it. Place it back during assembling.
Step 33 Detach SMPS P.C.B. and AC Inlet P.C.B. from bottom
chassis and position it according to the diagram shown.
Step 34 Process to check and service SMPS P.C.B. and AC
Inlet P.C.B.
10.4. Checking & Servicing DVD
Module P.C.B.
Step 1 Remove the top cabinet.
Step 2 Remove 3 screws at the rear panel.
Step 3 Remove 2 screws on Main P.C.B.
Step 4 Remove 2 ground springs on Main P.C.B.
Caution: Keep the ground springs in safe place. Avoid
denting it. Place it back during assembling.
Step 5 Detach 14P FFC at the connector (CN6003) on Main
P.C.B.
Step 6 Detach 7P cable at the connector (CN2010) on Main
P.C.B.
Step 7 Detach 19P FFC at the connector (CN2007) on Main
P.C.B.