Panasonic SA-PT875GA, Service Manual

Page: 68 / 165

68
Step 4 Remove 1 screw from the TR spring.
Step 5 Remove the TR spring in the direction of arrows.
Step 6 Remove the Audio Digital Power Amp IC (IC5000) from
the heatsink unit A.
Caution: Handle the D-Amp P.C.B. with care due to its high
temperature after prolonged use. Touching it may lead to
injuries.
Note: Refer to the diagrams of D-Amp P.C.B. (Item 18.4.) for
location of the electrical components.
9.16.2. Assembly of the Audio Digital
Power Amp IC (IC5000)
Step 1 Mount the Audio Digital Power Amp IC (IC5000) to the
D-Amp P.C.B.
Caution: Ensure pins of the Audio Digital Power Amp IC
(IC5000) are properly seated and soldered on D-Amp P.C.B.
Step 2 Screw the TR spring to the heatsink unit A.
Step 3 Use a blower to remove the minute particles that might
be caused after the process of the screwing TR spring to the
heatsink unit A.
Step 4 Solder pins of the Audio Digital Power Amp IC (IC5000)
on the solder side of D-Amp P.C.B.