91
• Checking & Servicing Side A of DVD Module P.C.B.
Step 25 Process to check and service side A of DVD Module
P.C.B.
• Checking & Servicing side B of DVD Module P.C.B.
Step 26 Remove 2 screws on DVD Module P.C.B.
Step 27 Twist the wire clamper to remove 3P cable at the con-
nector (CN5501).
Step 28 Remove 1 screws at the rear panel.
Step 29 Remove 6 screws at the rear panel.
Step 30 Release the catches and remove the fan unit.
Step 31 Release the tabs of rear panel to remove rear panel.
Step 32 Release the DVD Module P.C.B. from bottom chassis
and position it according to diagram shown.
Step 33 Connect 3P cable to the connector (CN5501) on D-
Amp P.C.B.
Step 34 Process to check and service side B of DVD Module
P.C.B.
Caution: Insulated material is required to support DVD
Module P.C.B.
Summary of Contents for SA-PT875GA
