Panasonic S Series, Technical Manual, Page: 78 / 111

Slide 77
Is the power
LED blinking 7
or 8 times?
8 Times 7 Times
Start Here
Is the power
LED blinking 6,
7, or 8 times?
7 Times
Remove SC20(SN20) from the SC(SN) board. Plug-in
the TV.
Note: If the power LED does not turn on
automatically after the TV is plugged in as
expected, then press the power switch.
Unplug the TV and reconnect SC20.
Follow VFO and VF5V resistance test
on the next page.
Replace the SS
board
Replace the A
board
Continue on the next page
Replace the
SN board
Troubleshooting 7 Blinks Failure (TC-P**S60, P**ST60)
TC-P42S60
All others S60/ST60 models
6 or 8
Times
A/Panel SS SC (SN) SU/SD
SN (42” 0nly)
7 Blinks
No.4 No.3 No.2 No.1
List of boards likely to cause this symptom. Blink
Code Note: Make sure there’re
not loose screws on the
SN/SC, SU, and SD boards.
TC-P42S60
TC-P50S60
All S60/ST60 models
except TC-P42/50S60
Unplug the TV and
reconnect SS11.
TC-P60ST60 TC-P60S60
TC-P55ST60 TC-P55S60
TC-P50ST60 TC-P50S60
----- TC-P42S60
Applies to Models
TC-P65S60 TC-P65ST60
Reseat connectors P2 on the P board and SC2 on the SC board. If the problem
persists, unplug the TV and remove connector SS11 from the SS board. Plug-in
the TV.
Note: If the power LED does not turn on automatically after the TV is
plugged in as expected, then press the power switch.
(1 of 4)