Panasonic S Series, Technical Manual, Page: 76 / 111

Slide 75
Troubleshooting 6 Blinks Failure (TC-P**S60)
A SN (42”)
SC(50”55”/60”/65”) 6 Blinks
No.4 No.3 No.2 No.1
List of boards likely to cause this symptom. Blink
Code
Yes
Verify that all the cables on the SC/SN board are
properly seated. Also check the ribbon cables and
connectors on the A and C boards. Unplug the TV
and disconnect connector SC20 on the SC board
(SN20 for TC-P42S60). Plug in the TV.
Note: If the
power LED does not turn on automatically after
the TV is plugged in as expected, then press the
power switch.
No
Is the TV taking
longer (Approx.
11 sec) to
shutdown?
Replace the A
board
Replace the SN
board
TC-P42S60
Replace the SC
board
All others S60 models
SN20
SN
SN
PSS
PSS
A
A
TC-P42S60
Start Here
Applies to Models
TC-P65S60
TC-P42S60
TC-P50S60
TC-P55S60
TC-P60S60