Before installation, please refer to step 1 of
INSTALLATION I. (P.6)
Fix the flange of frame to stud by 2 long screws
(ST4.2X30), and fix the suspension bracket to stud
by 2 long screws (ST4.2X30).
The adaptor of product must be
installed upward.
The screws for fixing suspension bracket should
not be replaced by other screws, otherwise the
cord in PCB box may be damaged and cause a fire.
Complete the wiring and duct work, please refer to step
2 and 3 of INSTALLATION I. (P. 6,7)
Insert one mounting spring into slot.
(If not, the grille may not be installed.)
Connect the LED lamp wire to fan body.
Adjust Pick-A-Flow™ switch. (Refer to
explanation under FEATURES). (Page 5)
2
3
4
Slot
Mounting
spring
Pick-A-Flow™
switch
LED lamp
wire
3
2
4
Install grille
Drywall
Mounting spring
Gloves
Grille
1
Insert the mounting springs into the slot as
shown to mount grille to fan body.
1
1
2
Stud
Stud
Adaptor
2 Long
screws
(ST4.2X30)
2 Long
screws
(ST4.2X30)
PCB box
2
Suspension bracket
2-Screws
(ST4.2x6)
3
Wall mounting installation
8
INSTALLATION I (JOIST MOUNTING) (CONTINUED)
INSTALLATION II (WALL MOUNTING)
