1. Remove the E-Ring , then remove the Main Cam.
2. Remove the E-Ring , then remove the Pinch Roller Cam and
Joint Gear.
Fig. 2-15-A
NOTE
1. In case of the Pinch Roller Cam and Main Cam installation, install
them as the circled section of
Fig. 2-15-B
so that the each markers
are met. (Refer to
Fig.2-15-B
)
Fig. 2-15-B
9.2.16. LOADING GEAR S/T UNIT (Refer to
Fig. 2-16-A
)
1. Remove the E-Ring and remove the Main Loading Gear.
2. Remove the Main Rod, Tension Lever, Loading Arm S Unit and
Loading Arm T Unit.
Fig. 2-16-A
21
