6. Remove the 2 screws .
7. Remove the Operation PCB in the direction of arrow (C).
Fig. 1-1
9.1.2. FLAP (Refer to
Fig. 1-2
)
1. Open Flap to 90° and flex in direction of arrow (A), at the same
time slide in direction of arrow (B).
2. Then lift in direction of arrow (C).
Fig. 1-2
9.1.3. DVD DECK (Refer to
Fig. 1-3
)
1. Make the short circuit on the position as shown
Fig. 1-3
using a
soldering. If you remove the DVD Deck with no soldering, the
Laser may be damaged.
2. Unlock the support and remove the Deck Top Holder in the
direction of arrow (A).
3. Remove the 3 screws .
4. Remove the screw .
7
