38
Playback Mode
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
Playing Back a Memory Card (For
PV-GS12/ PV-GS14/PV-GS15)
It plays back
fi
les recorded on a Card.
1 Set the Mode Dial
40
to Picture Playback
Mode.
►
:
Starting the Slide Show
:
Playing back the next picture
:
Playing back the previous picture
:
Stop the Slide Show
:
Pause the Slide Show
2 Start Playback.
40
To Change the Zoom Magni
fi
cation
2 Change the magni
fi
cation by pressing the [W]
Button or [T] Button
62
on the Remote
Control.
To Change the Enlarging Area of an Image
3 Press the Arrow Button (
▲
,
◄
,
►
,
▼
)
56
on
the Remote Control that points to the area
you want to enlarge.
To Cancel the Playback Zoom Function
Press the [P.B. ZOOM] Button
74
on the Remote
Control.
• For other notes concerning this item, see page 64.
Playback Digital Effect Functions
During playback, special digital effects can be added
to the recorded pictures. The same effects as those of
Digital Effects 1 and 2, which are used during
recording, are obtained.
1 Press the [
►
] Button
72
.
2 Press the [SELECT] Button
59
on the
Remote Control to select a desired digital
effect.
• When the [SELECT] Button is pressed repeatedly,
the digital effect selection changes.
• The same setting can be done using [EFFECT
SEL] Sub-Menu on the [TAPE PLAYBACK MENU].
To suspend Playback Digital Effect Temporarily
Press the [OFF/ON] Button
61
to suspend or
restart the digital effect. When the digital effect is
paused temporarily, the selected effect’s indication
fl
ashes.
• The same operating can be done using [EFFECT
ON] Sub-Menu on the [TAPE PLAYBACK MENU].
To Cancel the Digital Effect
Press the [SELECT] Button
59
repeatedly on the
Remote Control and clear the digital effect
indication.
Wipe Mode and Mix Mode (Remote
Control
Only)
• This feature is only available with Remote Control.
However it is not supplied for models PV-GS9/
PV-GS12/PV-GS14. If you would like to order, the
parts number is LSSQ0411 as a replacement parts.
Please refer to page 74.
1 Press the [
►
] Button
72
.
2 Press the [SELECT] Button
59
on the
Remote Control and select [WIPE] or [MIX].
3 Press the [STORE] Button
60
at the moment
you want to save as a still picture.
• The [
WIPE
] or [
MIX
] Indication appears, and
the image is saved.
4 Press the [OFF/ON] Button
61
in the scene
in which you want to use the Wipe or Mix
effect.
• The scene changes as a result of the Wipe or Mix
effect.
• The Wipe Function and Mix Function can only
be accessed by using the Remote Control during
playback.
• If the [OFF/ON] Button
61
is pressed while Wipe or
Mix is carried out, the effect will stop temporarily at
that point. Pressing the [OFF/ON] Button
61
again
will bring back the effect.
62
59
61
72
72
59
61
60
• For other notes concerning this item, see page 64.
