Panasonic PV-GS50S Operating Instructions Manual Download

Page: 51 / 112

Special Features

Using a Memory Card

An SD Memory Card or MultiMediaCard can be used to record files
or play back files.

≥

Use a genuine SD Memory Card or MultiMediaCard manufactured
by Panasonic only.

Inserting a Memory Card

Before inserting a Memory Card, be sure to turn off the Palmcorder.

Open the Card Slot Cover.

While holding the Memory Card with its cut corner

facing right, insert it into the Card Slot.

Close the Card Slot Cover securely.

Removing the Memory Card

Open the Card Slot Cover, press the center of the Card and then pull
it straight out.

≥

After removing the Card, close the Card Slot Cover.

≥

The Palmcorder or the Card may be damaged if the Card is forced
out when the Card is fully inserted.

[ACCESS] Lamp

While the Palmcorder is accessing the Card (reading, recording,

playback, erasing, moving of images), the [ACCESS] Lamp

lights

up.

≥

While the [ACCESS] Lamp is on,

never

attempt to: pull out the

Card, to turn off the Palmcorder power, or switch the [TAPE/CARD/
CARD MODE] Selector. Such actions will damage the Card and
cause the Palmcorder to malfunction.

OPEN

ACCESS

Special Features

PV-GS50P.book 51 ページ２００３年６月１３日　金曜日　午後３時２８分

Summary of Contents for PV-GS50S

















































































































Search results

Summary of Contents for PV-GS50S

Reviews:

Related manuals for PV-GS50S

Brands by name

Popular brands

Panasonic PV-GS50S, Operating Instructions Manual

Search results

Summary of Contents for PV-GS50S

Reviews:

Related manuals for PV-GS50S

Brands by name

Popular brands