Panasonic PV-DV102PN, Service Manual

Page: 83 / 337

MGF CHIP: Metal Glaze Film Chip
C CHIP: Ceramic Chip
COMPLX CMP: Complex Component
W FLMPRF: Wirewound Flameproof
C.B.A.: Circuit Board Assembly
P.C.B.: Printed Circuit Board
E.S.D.: Electrostatically Sensitive Devices
3. SERVICE OF CHIP PARTS
When servicing chip parts, please use a soldering iron of less than
30 W.
4. When replacing 0 resistor, a wire can be substituted for it.
5. Parts with mark "CSP" in the Remarks column are CSP (Chip Size
Package) IC.
6. IC6007 replacement note:
When replacing this IC, be sure to write the initial data with PC-
EVR Adjustment Program.
7. IC6001 replacement note:
Two types of IC6001 (M32121FCAWG or M32121MCA123) are used
on a running change basis, however IC6001 (M32121MCA123) is
supplied only as a replacement part. When replacing IC6001, as in
the following cases, it is necessary to replace the resistor at the
same time or IC6001 may have a short life.
- When replacing IC6001 (M32121FCAWG) with IC6001
(M32121MCA123), be sure to move resistor (Ref. No. R6051) to
the R6050 loacation.
83