Panasonic PV-DF2700-K, Service Manual

Page: 322 / 398

45
Advanced Operation
1 Display SELECT
SEARCH MODE screen.
Press SEARCH in
Playback or Stop mode.
Go directly to the desired recording.
• Make each entry within 10 seconds, or
the Index Search mode will be cancelled.
• If Direct Access or Index Scan search is
started very close to an index mark, that
index mark may not be counted in the
search.
Notes
• If there are no Timer
Recordings on the Program
Index List, go to step 3.
To calculate the Index Number
Example 1:
If you are watching recording 4 and you want to watch
recording 2, enter “3” in step 3 and press REW.
Example 2:
If you are watching recording 2 and you want to watch
recording 6, enter “4” in step 3 and press FF.
NOTE: indicates start points of each recording.
6 1 5 7 2 3 4
1 7 5 3 4 6 2
VHS Index Search System is ...
Each time recording is made, an invisible index mark is placed on
the tape. When timer recordings are made, program index and
information are also included. These index marks can be used to
access or scan recordings.
Direct Access
(For Normal and/or Timer recordings)
FF
4
REW
4
2
1) Press
to select
“INDEX
SEARCH.”
2) Press SET
to display.
Display INDEX screen.
ZERO SEARCH
I NDEX SEARCH
PROGRAM END SEARCH
SELECT :
SET : SET
END : SEARCH
SELECT SEARCH MODE
3
Press
NUMBERED
keys.
Select the recording
number.
• To calculate number, see below.
I NDEX
4
Press FF or REW.
Start search.
• When search is
finished, playback
begins.
or
I NDEX 0 4
I NDEX SEARCH 0 4
*Important:
if a remote control button does not work when pressed, press the button on the remote and try the button again.
PLAY/REPEAT