Panasonic PV-DF2700-K, Service Manual, Page: 289 / 398

12
One Time Setup
When the unit is turned on the first time, setup
mode is entered automatically.
1
Press POWER* on
the remote or unit.
Press CH .
(Setup completed)
Press CH to exit.
• If your area observes
daylight saving time,
but you would like to
turn the DST feature
off, complete the
“To Set or Reset the
Clock” steps on page
14 and set DST : OFF.
3
2
Select the language.
for English
for Spanish
(Español)
for French
(Français)
• If wrong language is set, complete “Reset all unit Memory
Functions” steps page 8.
• If you use a cable box, it must be left on.
(Setup incomplete)
IMPORTANT NOTE FOR AUTO CLOCK SET
• Auto clock set is performed the first time the unit is turned off each day. If used, a cable box must be left on and
tuned to the PBS channel at the time the unit power is turned off if you want auto clock set to be done.
• If using a DSS receiver, it must be turned off for auto clock set.
• If a Cable Box or DSS receiver is connected to the unit via Audio/Video Jacks, an RF coaxial cable must also be
connected for auto clock set and channel auto set features.
• If for any reason the time is changed manually, automatic time correction will not occur.
Case 1
See Case 1 next page.
CHANNEL / CLOCK AUTO SET
CONNECT ANTENNA CABLE
LOCAL PBS CH THEN. . .
AND I F YOU USE A CABLE
BOX, TUNE I T TO YOUR
PLE ASE PUSH CH UP KEY
Process of Setup
Language Channel Clock
CH AUTO SET PROCEED I NG
AUTO CLOCK SET
PROCEED I NG
PUSH ACT I ON TO SET CLOCK
AUTO CLOCK SET
I S I NCOMPLETE
•
If time is not correct...
even though your area observes daylight
saving time and DST is set to ON, do
Time Zone Adjust steps on the next page.
Start Channel Auto Set
and Clock Auto Set.
2 / 7 / 2001 WED 12 : 00PM
DST : ON
AUTO CLOCK SET
COMPLETED
SETT I NG : CH 1 0
END : PRESS CH UP KEY