Program Out Connection (PROG OUT)
you
lso be connected to the PROG
UT and TO AUDIO AMP terminals. Connect the VCR as shown below.
Procedure
•
Connect the VCR to PROG OUT and TO AUDIO AMP terminals
•
PROG OUT terminal display is the same as on-screen display. See the
VCR instruction manual for further instructions for recording the
program.
Notes:
•
This TV contains Video and Audio Outputs for the purpose of recording
sion programming to VCR. Due to license restrictions, if a device
•
Program Out signal may not be available when component input is
r,
ll digital formats are down converted to composite NTSC video.
•
When receiving digital or analog channel signals and the analog or digital
CC is ON, Program Out connector will output open caption text in the
NTSC video picture. If CC is OFF, only analog CC closed caption code is
passed out from the Program Out connector.
•
Certain program content output from the Program Out connector may
have the Macrovision signal modification applied to its signal, preventing
VCRs from recording this video signal.
You can connect a VCR to the PROG OUT terminal to record the program
are viewing on-screen. An external monitor can a
O
Figure 17
televi
(STB, DVD, etc.) is connected to the HDMI input of the TV, no video or
audio output is allowed.
selected for main picture.
•
Program Out signal is available when receiving digital channel. Howeve
a
36
Summary of Contents for PT47WXD63 - 47" PROJECTION TV
