Panasonic PT47WXD63 - 47" PROJECTION TV, Technical Manual, Page: 91 / 99

Service Mode (Electronic Controls)
a) Press the Menu button on the remote control to access the service menu.
b) Use the
CH
c
or
CH
d
and
e
VOL
or
VOL
f
button to highlight the Setup
menu.
c) Press the
OK
button to enter the Setup mode.
d) Press the
e
VOL
or
VOL
f
button to access the Program Channel
function.
e) Use the
VOL
f
button to change to cable mode.
f) Press the
Menu
button twice to exit the setup menu.
g) Press the
CH
c
or
CH
d
and
OL
or
VOL
f
until the timer function is
highlighted.
h) Press the
OK
button to access the timer settings.
i) Press the
CH
c
or
CH
d
Channel Up button to access the sleep timer
adjustment.
j) Use the
e
VOL
or
VOL
f
button to adjust the sleep timer to 30 minutes or
higher.
k) Press the
Menu
Action button, as many times as needed, to exit the timer
mode.
l) Tune the set to channel 124.
m) Using the front control panel of the PTV, press and hold the Volume Down
button until
CHK
is displayed in red in the upper left-hand corner of the
screen.
n) Select an active channel or video source.
To toggle between aging and service modes:
VOL
f
buttons on the remote
and
OK
to enter the adjustment.
e
V
While the “
CHK
” is displayed on the left top corner of the CRT, pressing the
“
OK
” and
VOL
f
buttons on the TV simultaneously will toggle between the
modes. Red “CHK” is for service mode and yellow “CHK” for aging.
•
Press the
POWER
button on the
remote control to display the
service adjustment menu. Select
the adjustment by pressing the
CH
c
or
CH
d
and
e
VOL
or
Figure 49
87