34 - ENGLISH
Powering on/off
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily.
For details of power cord handling, refer to “Read this first!” (
x
page 2).
Attaching
1) Check the shapes of the <AC IN> terminal on the back of the projector body and the power cord
connector and insert the plug completely in the correct direction.
Removing
1) Confirm that the projector is in standby mode, and remove the power plug from the outlet.
2) Remove the power cord connector from the <AC IN> terminal.
Power indicator
The power indicator <ON(G)/STANDBY(R)> informs you the status of the power. Confirm the status of the power indicator
<ON(G)/STANDBY(R)> before operating the projector.
Indicator status
Status
No illumination
The projector is turned off. (The power cord is unplugged.)
Red
Lighting
The power cord is plugged.
The projector is in standby mode after the cooling is completed.
Blinking
The projector is in warming up after turning on the power.
The projector is in projected state after a while.
The projector is cooling down.
The power is switched off after a while. (Changes to the standby mode.)
Green
Lighting
Projecting.
Blinking
The projector is in ready mode with Power management function.
Orange
Lighting
The abnormal inside is detected. (Warning)
Blinking
The temperature inside the projector is abnormally high. (Warning)
x
Power indicator <ON(G)/STANDBY(R)>
Chapter 3 Basic Operations - Powering on/off
