Panasonic PT-ST10U, Operating Instructions Manual

Page: 40 / 67

Settings
40

ENGLISH
SECURITY MENU
Remote control Control panel
MENU RETURN
ENTER
FREEZE
AV
MUTE
COMPUTER VIDEO
DEFAULT FUNCTION
WIN.
INDEX-
MENU
ENTER
DEFAULT
MENU
FUNCTION
ENTER
INPUT
SELECT
LAMP
STANDBY
(
R
)
ON ( G )
TEMP
MENU
ENTER
MENU RETURN
ENTER
FREEZE
AV
MUTE
COMPUTER VIDEO
DEFAULT FUNCTION
WIN.
INDEX-
MENU
ENTER
DEFAULT
MENU
FUNCTION
ENTER
INPUT
SELECT
LAMP
STANDBY
(
R
)
ON ( G )
TEMP
MENU
ENTER
Set the selected item with [

].
When you use SECURITY menu for the first time, you
will be asked to perform the password operation. Input
the initial password by pressing [

] in
this order and then press [ENTER] .
NOTE:
If you have changed the password, input the new password •
and press [ENTER] .
▌
PASSWORD
You can activate the security system and the password
operation will be asked to perform when projection
mode starts.
Change setting
Change
setting
Change
setting
Change setting
OFF Deactive
ON Active
NOTE:
PASSWORD • is set to OFF by default and when initialized.
Change your password regularly. Do not use a simple •
password that is easy to decode.
Unless you perform the correct password operation, all of •
the control buttons will be disabled except the [POWER]
button.
Menu operation (continued)
▌
PASSWORD CHANGE
You can change the password.
1
To change the password.
(Up to 8 button operations can be set.)
2
ENTER
3
ENTER
Input the password again and press
the button.
NOTE:
The entered password operations will appear as asterisks in •
the box.
If the password input second does not match with the •
password input first, an error message is displayed. In this
case, input the correct password again.
▌ TEXT DISPLAY
You can set your original text to display regularly at the
bottom of the projected image during projection.
Change setting
Change
setting
Change
setting
Change setting
OFF Deactive
ON Active
When • CLOSED CAPTION SETTING is set to ON ,
SECURITY TEXT will not be displayed.
▌ TEXT CHANGE
You can enter your original text to be displayed when
TEXT DISPLAY
is turned
ON
.
1
ENTER
To select
the characters
(You can input up to 22 characters.)
To delete all the entered characters, move the
cursor to ALL DELETE and press [ENTER] .