Getting started
14
ENGLISH
Set up your projector
SCREEN SIZE AND THROW DISTANCE
You can calculate and define the throw distance as follows.
69
.2 mm
L
S
W
SD
SW
S
H
S
H
H
L
Screen
Screen
Projected image
(All measurements below are approximate and may differ slightly from the actual measurements.)
Projection size
For 4:3 aspect ratio
For 16:9 aspect ratio
Screen diagonal (SD) Throw distance (L) Settable height (H) Throw distance (L) Settable height (H)
1.52 m (60")
0.60 m (2' 0")
0.05 m (0' 2")
0.66 m (2' 2")
0.17 m (0' 7")
1.78 m (70")
0.71 m (2' 4")
0.05 m (0' 2")
0.78 m (2' 7")
0.20 m (0' 8")
2.03 m (80")
0.82 m (2' 8")
0.06 m (0' 2")
0.90 m (2' 11")
0.23 m (0' 9")
2.29 m (90")
0.92 m (3' 0")
0.07 m (0' 3")
1.01 m (3' 4")
0.26 m (0' 10")
2.54 m (100")
1.03 m (3' 4")
0.08 m (0' 3")
1.13 m (3' 8")
0.29 m (0' 11")
2.79 m (110")
1.14 m (3' 9")
0.08 m (0' 3")
—
—
You can calculate detailed screen dimensions from the “Screen diagonal”. The unit of all the calculation results is
m. (The results below differ slightly from the actual measurements.)
If the projection size is SD,
For 4:3 aspect ratio
For 16:9 aspect ratio
Screen height (SH)
= SD (") × 0.0152
= SD (") × 0.0125
Screen width (SW)
= SD (") × 0.0203
= SD (") × 0.0221
Throw distance (L)
= 0.0107 × SD (") - 0.0389
= 0.0117 × SD (") - 0.0395
NOTE:
For best projection image quality, install a screen where sunlight or room lightings do not
•
shine directly onto the screen. Close window shades or curtains to block the light and
turn off the lightings.
Do not use the projector at a raised or horizontally tilted position. It may cause the
•
projector to malfunction.
However, you can tilt the projector’s body approximately ±30 ° vertically and ±10 °
horizontally.
Over tilting may result in shortening the component’s life.
Do not cover the air outlet port and air intake ports or place anything within 50 cm (20") near them as this may cause damage
•
or injury.
+30 °
-30 °
Getting started
