manualshive.com logo in svg

Panasonic PT-RQ22K, Operating Instructions (Functional Manual)

Share
Download
Panasonic PT-RQ22K Operating Instructions (Functional Manual) Download Page 175

Chapter 4

 

Settings — [PROJECTOR SETUP] menu

ENGLISH - 175

When [CONSTANT MODE] is set to [AUTO], and [LINK] is set to [GROUP A] through [GROUP D]

The screen shows the status of the brightness control of synchronized projectors (up to eight units), including the 

projector being controlled through the on-screen menu.

2

1

3

4

5 

7

8

LINK

UPDATE

PROJECTOR

GROUP A

PROJECTOR2
PROJECTOR3

BRIGHTNESS CONTROL STATUS

MENU SELECT

1:
2:
3:
4:
5:
6:
7:

192. 168. 30.   2

192. 168. 30.   3
192. 168. 30.   4

When [CONSTANT MODE] is set to [PC]

5

1

6

RETURN

CONSTANT MODE

PROJECTOR

PC

BRIGHTNESS CONTROL STATUS

MENU

1  Display the name of the projector.
2  Display the synchronized group.
3  Display the IP address of the projector.
4  Display the names and IP addresses of projectors in same group detected over the network.
5  Display the status by color.

Green: There is an allowance for brightness correction.

Yellow: There is little allowance for brightness correction.

Red: There is a brightness control error.

6  Display error detailed messages.
7  Display error messages.

When the message [Failed to apply BRIGHTNESS CONTROL to some projectors.] appears, it means that synchronization with the 

projector displayed in red has failed.

Press 

as

 to select the projector displayed in red, and press the <ENTER> button to display the error details.

8  Update to the latest status information.

 

r

Error details

Error message

Measures to take

[Exceed maximum number of 

projectors.]

 

f

Limit the number of projectors in one group to eight.

 

f

To synchronize nine or more projectors, use a PC and the dedicated software “Multi Monitoring & 

Control Software”

*1

.

[Please check the COMMAND 

CONTROL setting.]

 

f

Set [NETWORK CONTROL] 

→

 [COMMAND CONTROL] to [ON] for the projector in error.

 

f

Set [NETWORK CONTROL] 

→

 [COMMAND PORT] of all linked projectors to the same value.

[Please check the USER NAME 

and PASSWORD in the COMMAND 

CONTROL setting.]

 

f

Assign same character strings for [User name] and [Password] as the web control administrator 

rights to all linked projectors.

[Cannot apply BRIGHTNESS 

CONTROL. Please check projector 

status.]

 

f

The projector is in standby. Switch on the power.

[Brightness Sensor Error]

 

f

There is a problem with the brightness sensor. If problems persist even after switching on the 

power, consult your dealer.

*1 

“Multi Monitoring & Control Software” can be downloaded from the Panasonic website (https://panasonic.net/cns/projector/).

Summary of Contents for PT-RQ22K

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands