Chapter 4
Settings — [PICTURE] menu
ENGLISH - 107
f
This may not function properly for some connected external devices.
f
The selection item for the input signal to the <HDMI IN 1> terminal and the <HDMI IN 2> terminal can be selected when the optional
Interface Board equipped with the HDMI input is installed in <SLOT 1>.
f
The selection item for the input signal to the <HDMI IN 3> terminal and the <HDMI IN 4> terminal can be selected when the optional
Interface Board equipped with the HDMI input is installed in <SLOT 2>.
f
The selection item for the input signal to the <DVI-D IN 1> terminal and the <DVI-D IN 2> terminal can be selected when the optional
Interface Board equipped with the DVI-D input is installed in <SLOT 1>.
f
The selection item for the input signal to the <DVI-D IN 3> terminal and the <DVI-D IN 4> terminal can be selected when the optional
Interface Board equipped with the DVI-D input is installed in <SLOT 2>.
f
For the SDI input, the signal format can be set in detail in the [DISPLAY OPTION] menu
→
[SDI IN] (
x
page 128).
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f
Refer to [COLOR MATCHING] (
x
page 122).
2) Display the [PICTURE] menu.
f
Refer to “[PICTURE] menu” (
x
page 99).
3) Press
as
to select [PICTURE MODE].
4) Press
qw
to set [NATURAL].
5) Press
as
to select [COLOR].
6) Press the <DEFAULT> button on the remote control to set the factory default setting.
7)
Follow Steps 5) to 6) to set [TINT], [COLOR TEMPERATURE], [GAMMA], and [SYSTEM DAYLIGHT
VIEW] to the factory default settings.
Note
f
sRGB is available for RGB signal input only.
