Panasonic PT-RQ22K, Operating Instructions (Functional Manual)

Page: 135 / 288

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 135
r
Structure of the projected image
The single link is a setting to display one image with one input signal. The dual link is a setting to display one
image with two input signals. The quad link is a setting to display one image with four input signals.
Dual link
HDMI1/
HDMI3
HDMI1 HDMI2
HDMI3 HDMI4
HDMI2/
HDMI4
Quad link Single link
Setting [SIGNAL LEVEL] in [SLOT IN] (HDMI input)
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The [SLOT IN] screen is displayed.
3) Press
as
to select [SINGLE LINK SETTING], [DUAL LINK SETTING], or [QUAD LINK SETTING], and
press the <ENTER> button.
f
The [SINGLE LINK SETTING] screen, the [DUAL LINK SETTING] screen, or the [QUAD LINK SETTING]
screen is displayed.
4) Press
as
to select [SIGNAL LEVEL].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO] Automatically sets the signal level.
[64-940]
Select this item when the HDMI terminal output of the external device (such as Blu-ray disc player)
is input to the <HDMI IN 1> terminal, the <HDMI IN 2> terminal, the <HDMI IN 3> terminal, or the
<HDMI IN 4> terminal.
[0-1023]
Select this item when the DVI-D terminal output from the external device (such as computer) is input
to the <HDMI IN 1> terminal, the <HDMI IN 2> terminal, the <HDMI IN 3> terminal, or the <HDMI IN
4> terminal via a conversion cable, etc.
This is the same when the HDMI terminal output from a device such as a computer is input to the
<HDMI IN 1> terminal, the <HDMI IN 2> terminal, the <HDMI IN 3> terminal, and the <HDMI IN 4>
terminal.
Note
f
The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f
The HDMI signal level is displayed for 30 bits of input.
Setting [AUTO GAMMA SELECT] in [SLOT IN] (HDMI input)
Set this item when the gamma mode is to be automatically set based on the InfoFrame information added to the
video signal.
1) Press
as
to select [SLOT IN].
2) Press the <ENTER> button.
f
The [SLOT IN] screen is displayed.
3) Press
as
to select [OPTION SETTING].
4) Press the <ENTER> button.
f
The
[OPTION SETTING]
screen is displayed.
5) Press
as
to select [AUTO GAMMA SELECT].