Chapter 3
Basic Operations — Switching on/off the projector
52 - ENGLISH
When the initial setting screen is displayed
When the projector is switched on for the first time after purchase, as well as when the [PROJECTOR SETUP]
menu → [INITIALIZE] → [ALL USER DATA] is executed, the focus adjustment screen is displayed after projection
starts, and then the
[INITIAL SETTING]
screen is displayed followed by the
[ADMINISTRATOR ACCOUNT]
screen. When the [PROJECTOR SETUP] menu → [INITIALIZE] → [NETWORK/E-MAIL] is executed, the
[ADMINISTRATOR ACCOUNT]
screen is displayed after projection starts.
In other occasions, you can change the settings by menu operations.
If you press the <MENU> button while the
[INITIAL SETTING]
screen is displayed, you can go back to the
previous screen.
Same operation is available by pressing the <RETURN> button.
Focus adjustment
Adjust the focus to display the menu screen clearly.
Adjustment of the zoom and shift may also be necessary.
For details, refer to “Adjusting the focus, zoom, and lens shift” (
x
page 60).
1) Press
asqw
to adjust the focus.
LENS
FOCUS
ADJUST
2) Press the <MENU> button to proceed to the initial setting.
Initial setting (display language)
Select the language to show on the screen.
After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.
1) Press
asqw
to select the display language.
1/6
Қазақша
INITIAL SETTING
SELECT
SET
ENTER
2) Press the <ENTER> button to proceed to the initial setting.
