Chapter 5
Operations — Using HDMI-CEC function
ENGLISH - 165
1 Displays the device name to be operated.
2 [MENU]
Call up the operation menu of the CEC-compatible device.
3 [POWER]
Switch on/off the device.
4 [RETURN]
Returns the operation menu of the CEC-compatible device to the
previous screen.
Note
f
If the operation menu of the CEC-compatible device cannot be called up from the HDMI-CEC operation screen, change the menu code
setting. For the operation details , refer to “Changing the menu code” (
x
page 124).
f
If you cannot operate the operation menu of a CEC-compatible device, try setting the [PROJECTOR SETUP] menu → [HDMI CEC] to [OFF]
and [ON] again. It may be improved.
f
While the HDMI-CEC operation screen is displayed, only the number buttons on the remote control can be used and other button operations
are disabled.
Menu operation of CEC-compatible device
When the setting menu of the CEC-compatible device is displayed, you can use the
▲▼◀▶
buttons and
<ENTER> button of the remote control to operate the menu.
About the link control
By setting the [PROJECTOR SETUP] menu → [HDMI CEC] → [PROJECTOR -> DEVICE] / [DEVICE ->
PROJECTOR] to a setting other than [DISABLE], the following link operations can be achieved.
The link control setting of [PROJECTOR -> DEVICE]
r
When the setting is [POWER OFF] or [POWER ON / OFF]
f
If the projector is switched off, all connected CEC-compatible devices are switched off.
r
When the setting is [POWER ON / OFF]
f
If the input channel is HDMI1, HDMI2 or HDMI3 when the projector is switched on and starts projection, then
the CEC-compatible devices connected to the <HDMI IN 1> terminal, <HDMI IN 2> terminal or <HDMI IN 3>
terminal are switched on upon startup of the projector.
The link control setting of [DEVICE -> PROJECTOR]
r
When the setting is [POWER ON] or [POWER ON / OFF]
f
While the projector is in standby, if the CEC-compatible device is turned on, the projector turns on and switches
to the input that the CEC-compatible device is connected.
f
While the projector is in standby, if the CEC-compatible device starts playing, the projector turns on and switches
to the input that the CEC-compatible device is connected.
f
While the projector is turned on, if the CEC-compatible device starts playing, the projector switches to the input
that the CEC-compatible device is connected.
r
When the setting is [POWER ON / OFF]
f
When the CEC-compatible device connected to the selected input (HDMI1, HDMI2 or HDMI3) is switched off,
the projector enters standby mode.
Note
f
Depending on the status of the device, such as when the projector or the CEC-compatible device is starting up, the link control may not
operate normally.
f
If the CEC-compatible device does not support CEC 1.4, it may not support the link control described in the manual.
