Chapter 5
Operations — Web control function
ENGLISH - 155
Note
f
The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult
your dealer.
[Ping test] page
Check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up]
→
[Ping test].
1
2
3
4
Crestron tools
Network security
1 [Input IP address]
Enter the IP address of the server to be tested.
2 [Submit]
Executes the connection test.
3 Example of display when the connection has succeeded
4 Example of display when the connection has failed
[Network security] page
Make settings to protect the projector from external attacks via LAN and unauthorized use.
Click [Detailed set up]
→
[Network security].
1
2
1 [COMMAND PROTECT]
Make settings for the connection authentication when using the
command control function.
[DISABLE]: Connect to the projector in non-protected mode.
Connection authentication is not performed.
[ENABLE]: Connect to the projector in protected mode.
The user name and password of the administrator account are
required for the connection authentication.
2 [Submit]
Updates the setting.
If you click [Submit] with [DISABLE] selected in [COMMAND
PROTECT], a confirmation screen will be displayed. Click [OK]
on the confirmation screen to update the settings.
Note
f
When [COMMAND PROTECT] is set to [DISABLE], connection authentication is not performed, making it vulnerable to threats on the
network. Be aware of the risks before making settings.
f
For details on how to use the command control function, refer to "Control commands via LAN". (
x
page 188)
[E-mail set up] page
When there is a problem or the runtime of the light source reaches the preset value, an E-mail can be sent to
previously set E-mail addresses (up to two addresses).
Click [Detailed set up]
→
[E-mail set up].
