Chapter 5
Operations — Using HDMI-CEC function
164 - ENGLISH
Using HDMI-CEC function
HDMI-CEC function allows the basic operation of CEC-compatible device with the projector remote control or the
link control between the projector and CEC-compatible device.
Connecting a CEC-compatible device
Connect a CEC-compatible device to the <HDMI IN 1> terminal, <HDMI IN 2> terminal or <HDMI IN 3> terminal.
CEC-compatible device
Blu-ray disc player (example)
CEC-compatible device
Blu-ray disc player (example)
HDMI cable
(commercially available)
Repeater
Connection example with CEC-compatible device
Setting the projector and CEC-compatible device
Before using the HDMI-CEC function, you need to configure the settings on the projector and the CEC-compatible
device.
f
CEC-compatible device: enable the HDMI-CEC function.
f
Projector: Set the [PROJECTOR SETUP] menu → [HDMI CEC] to [ON]. (
x
page 123)
Note
f
After switching on the CEC-compatible device, switch on the projector and select HDMI1 input, HDMI2 input or HDMI3 input, then check that
the image from the CEC-compatible device is projected correctly.
f
While performing contact control using the <REMOTE 2 IN> terminal, the [HDMI CEC] menu is fixed to [OFF] and the CEC function is
disabled.
Operating the CEC-compatible device with the projector remote control
You can operate the device using the projector remote control by calling up the operation menu of the CEC-
compatible device from the HDMI-CEC operation screen. Use the number buttons (<2>, <5>, <8>) on the remote
control to select the operation item on the HDMI-CEC operation screen.
About the HDMI-CEC operation screen, refer to“Operating a CEC-compatible device” (
x
page 123).
1
2
3
4
(Device name)
HDMI-CEC operation screen
