Panasonic PT-MZ880, Operating Instructions Manual, Page: 125 / 207

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 125
[DISABLE]
Disables the link control from the CEC-compatible device to the projector.
Select this when you do not want the power status of the projector to link with the power status of the CEC-
compatible device.
[POWER ON]
Enables power-on link control.
While the projector is in standby, if the CEC-compatible device connected to the <HDMI IN 1> terminal,
<HDMI IN 2> terminal or <HDMI IN 3> terminal is turned on or starts playing, the projector turns on, starts
projection, and switches to the input that the linked CEC-compatible device is connected. While the projector
is turned on, if the CEC-compatible device starts playing, the projector switches to the input that the CEC-
compatible device is connected.
Power-off link control is disabled.
[POWER ON/OFF]
Enables power-on link control and power-off link control.
While the projector is in standby, if the CEC-compatible device connected to the <HDMI IN 1> terminal,
<HDMI IN 2> terminal or <HDMI IN 3> terminal is turned on or starts playing, the projector turns on, starts
projection, and switches to the input that the linked CEC-compatible device is connected. While the projector
is turned on, if the CEC-compatible device starts playing, the projector switches to the input that the CEC-
compatible device is connected.
When the CEC-compatible device connected to the selected input is turned off, the projector enters standby
mode.
Note
f
If the CEC-compatible device does not support CEC 1.4, it may not support the link control described in the manual.
[INITIALIZE]
Return various setting values to their factory default settings.
1) Press
as
to select [INITIALIZE].
2) Press the <ENTER> button.
f
The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
f
The [INITIALIZE] screen is displayed.
4) Press
as
to select an item to initialize.
[ALL USER DATA]
Returns all setting values including [REGISTERED SIGNAL], [NETWORK/E-MAIL], [LOGO IMAGE]
and [UNIFORMITY] to the factory default settings.
The projector enters the standby mode to reflect the setting values.
[REGISTERED SIGNAL]
Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in “Deleting the
registered signal” (
x
page 127).
[NETWORK/E-MAIL]
Returns all the setting items under the [NETWORK] menu and all the setting items under the
operation page in the [Detailed set up] page to the factory default settings.
f
The items of [Time Zone], [Date], and [Time] in the [Adjust clock] page of the web control screen do
not return to the factory default settings.
[LOGO IMAGE] Deletes the image registered in [USER LOGO].
[UNIFORMITY]
Sets the setting of the [DISPLAY OPTION] menu → [UNIFORMITY] → [USER CORRECTION] to the
factory default setting.
5) Press the <ENTER> button.
6)
When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Note
f
The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE].
Initial password as the factory default:
awsqawsq
f
The following settings are not initialized even if [ALL USER DATA] is executed.
g
The [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE]
g
The [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE]
f
When the projector is switched on for the first time after purchase, as well as when the [PROJECTOR SETUP] menu → [INITIALIZE] →
[ALL USER DATA] is executed, the focus adjustment screen is displayed after projection starts, and then the [INITIAL SETTING] screen is
displayed followed by the [ADMINISTRATOR ACCOUNT] screen. When the [PROJECTOR SETUP] menu → [INITIALIZE] → [NETWORK/
E-MAIL] is executed, the [ADMINISTRATOR ACCOUNT] screen is displayed after projection starts.
[SERVICE PASSWORD]
This function is used by a service person.